|
Discontinued: MC3 MR98 Rear Tri-Damper Trailing Arm Kit for MR03 or PNR2.5
|
|
|
|
Part Number:
|
MC3MR98FKMR03
|
|
| |
|
|
|
|
|
|
|
|
|
|
Description:
|
***discontinued***
This is MC3's winning conversion kit for Kyosho MR-03 or PNR 2.5 chassis.
*This kit is designed for pure, no-compromise performance for the Kyosho MR03 VE/EVO chassis or the PNR 2.5 chassis equipped with either PN Racing's Double A-Arm Front Suspension System (#MR3070) or MC3's upcoming Double A-Arm Front Suspension System.
Since we are focused purely on performance, this kit is only compatible with certain bodies**
All plastic parts are CNC machined to thousands of an inch (0.02mm) precision meaning these fit perfect right from the start, not like injection molded parts which can have variances of up to +/-0.1mm and require "cleanup" to get a good fit.
All plastic parts are made from Delrin (also known as Acetal). This plastic is the best for parts that move (or have a rotation inside of it like the side rails) since it is known as a slick/slippery compound.
This kit features the following design features:
- The entire rear suspension is aligned with the centre ball as opposed to other trailing arm tri-damper systems; by keeping it aligned, performance is optimized
- Large front carbon bumper protects the front end from damage
- Rear motor mount uses set screws to secure bearing holders eliminating differential shaft play
- What we call the "trailer hitch" uses the same concept as a real trailer hitch. The plastic "receiver" pops onto the ball securely. This means that if you get hit from the side, say to the rear wheels, unlike other designs out there right now, ours will not come off during a crucial part of the race
- (optional) Rear diffusor is placed & sized optimally. It begins before the rear axles which means it pulls down the car at the axle
**If you have a 3D printer, you can make it yourself as we've made the file completely free to print! Click here**
Kit comes with:
- T7075 Anodized Red Aluminum Motor Mount with carbon upper & lower plates, cross brace
- T7075 Anodized Red Aluminum Grommets (x4)
- T7075 Anodized Red Motor Mount Post
- Carbon Fibre Bottom Chassis Plate
- Carbon Fibre Top Chassis Plate
- Carbon Fibre Bumper
- Front Foam Bumper Clip
- Bearing Adapter Set (4 pairs)
- Trailer Hitch
- No. 1 and No. 2 side rails (2 pairs total)
- Foam bumper and Body Post set (4 pcs)
- Carbon Fibre body post brace set
- Shim set (M2 x 4.8mm Shims 0.1/0.2/0.3mm) (15 pcs total)
- all hardware to assemble the kit (screws/ ball nut, etc...)
- 1.5mm hex key
- 0.9mm hex key
Needed to complete your build:
- Kyosho MR03 Brushless chassis (VE PRO/EVO)
- PN Double A-Arm Front Suspension System (#MR3070) or MC3's Double A-Arm Front Suspension System
- PN Racing Mini-Z MR015/02 Dual Spring Center Shock Set (#MR2161)
- PN Racing Mini-Z TDS Damper Set 2pcs (#MR2990)
- Brushless Motor with holes (recommend 16mm round can)
- Batteries for chassis
- Wheels and 98mm Body (Polycarbonate recommended)
- Assembly Tools (philips screwdriver, 4.5mm nut driver, pliers)
**Instruction Manual Link - Click here**
**This kit is meant to be run with a 98mm polycarbonate (e.g Lexan/Makrolon) body. Although we have successfully tested, raced and won with a Jomurema GT01 hard plastic body with minor modification- others may fit
|
Attachments:
|
|
|
|
|
|
